Super Bright Diving Scuba 1100LM XPL Led Flashlight Torch 26650 Battery with Charger Review

This is Garberiel Brand diving searchlight with 5 modes: Low/Mid/High/Turbo,and hidden Strobe. Click the side switch to turn on, then click to change brightness, double click to Strobe, press and hold the side switch to turn it off.

Technical Parameters
1. Uses one XPL LED
2. Uses 1x 18650 or 26650 3.7v battery
3. With double O-rings, the max diving depth is 100m under water

Operation
With the light on, press the side switch to cycle through 3 different brightness levels
Double click the side switch quickly goes to Strobe, another click goes back to the previous mode. In any mode press and hold the side switch for 1 second to turn the light off.

Battery Replacement
Unscrew the body, take out the battery, insert a new one with anode(+) towards the head, and screw the body tight to test. Please make sure the O-ring is good and screw the light tight before diving.

Usage and Maintenance

● Please do not disassemble the sealed head, doing so can cause damage to the flashlight.
● Please take out the battery if the flashlight will not be used for a long time, or it may cause damage from electrolyte leakage or battery explosion.
● The O-ring may be worn out after using for a long time. If it happens, please replace the O-ring with a new one to keep the light properly sealed against water.
● Please clean the contacts of your light from time to time, especially if the light flickers or does not light up. There may be several reasons for a flickering or not working light:
Reason A: The battery needs replacing.
Solution: Replace the battery (Please confirm the correct installation of anode and cathode)
Reason B: The threads, PCB board contact or other contacts are dirty.
Solution: Clean the contact points with an alcohol soaked cotton swab.

Package Include:
1x Diving Scuba Led Flashlight
1x Charger
1x 26650 Battery